Здравствуйте! Проблема такая, 951G все порты ввел в один Bridge, все правила Firewall и NAT пустые. Не работает Multicast IPTV и WakeOnLan, на тупом свитче все работало. Подскажите пожалуйста, где что нажать? Спасибо
Попробуйте включить IGMP Snooping /interface bridge set bridge1 igmp-snooping=yes Если не поможет копайте в направлении /bridge filter
попробуйте убрать Wireless из бриджа или, хотя бы отфильтруйте мультикаст идущий на этот интерфейс Проверьте работает ли WoL непосредственно с роутера (команда /tool wol )
Код: # sep/05/2019 22:55:40 by RouterOS 6.45.5 # software id = # # model = RBD52G-5HacD2HnD # serial number = /caps-man channel add band=2ghz-onlyn control-channel-width=20mhz name=channel1 tx-power=30 add band=5ghz-a/n/ac control-channel-width=20mhz name=channel2 tx-power=30 /caps-man datapath add client-to-client-forwarding=yes local-forwarding=yes name=datapath1 /interface bridge add admin-mac=auto-mac=no comment=defconf igmp-snooping=yes name=bridge /interface ethernet set [ find default-name=ether1 ] speed=100Mbps set [ find default-name=ether2 ] speed=100Mbps set [ find default-name=ether3 ] speed=100Mbps set [ find default-name=ether4 ] speed=100Mbps set [ find default-name=ether5 ] speed=100Mbps /interface l2tp-client add allow=mschap2 connect-to= disabled=no name=l2tp-out1 password= user=ppp1-super /interface wireless # managed by CAPsMAN # channel: 2452/20-Ce/gn(20dBm), SSID: , local forwarding set [ find default-name=wlan1 ] band=2ghz-b/g/n channel-width=20/40mhz-Ce disabled=no distance=indoors frequency=auto mode=\ ap-bridge ssid=BADRNET wireless-protocol=802.11 # managed by CAPsMAN # channel: 5180/20-Ceee/ac/P(20dBm), SSID: , local forwarding set [ find default-name=wlan2 ] band=5ghz-a/n/ac channel-width=20/40/80mhz-Ceee disabled=no distance=indoors frequency=auto \ mode=ap-bridge ssid= wireless-protocol=802.11 /caps-man security add authentication-types=wpa2-psk encryption=aes-ccm group-encryption=aes-ccm name=security1 passphrase= /caps-man configuration add channel=channel1 country=russia3 datapath=datapath1 distance=indoors hw-protection-mode=cts-to-self installation=indoor \ mode=ap name= rx-chains=0,1,2 security=security1 ssid= tx-chains=0,1,2 add channel=channel2 country=russia3 datapath=datapath1 distance=indoors hw-protection-mode=cts-to-self installation=indoor \ mode=ap name= rx-chains=0,1,2 security=security1 ssid= tx-chains=0,1,2 /interface list add comment=defconf name=WAN add comment=defconf name=LAN /interface wireless security-profiles set [ find default=yes ] authentication-types=wpa-psk,wpa2-psk mode=dynamic-keys supplicant-identity=MikroTik \ wpa-pre-shared-key=12345678badr wpa2-pre-shared-key= /ip hotspot profile set [ find default=yes ] html-directory=flash/hotspot /ip pool add name=dhcp ranges=192.168.0.10-192.168.0.254 /ip dhcp-server add address-pool=dhcp disabled=no interface=bridge name=defconf /caps-man access-list add action=accept allow-signal-out-of-range=10s disabled=no interface=any signal-range=-85..120 ssid-regexp="" /caps-man manager set enabled=yes /caps-man provisioning add action=create-dynamic-enabled hw-supported-modes=b,gn master-configuration= add action=create-dynamic-enabled hw-supported-modes=an,ac master-configuration= /interface bridge port add bridge=bridge comment=defconf interface=ether2 add bridge=bridge comment=defconf interface=ether3 add bridge=bridge comment=defconf interface=ether1 add bridge=bridge comment=defconf interface=ether5 add bridge=bridge comment=defconf interface=wlan1 add bridge=bridge comment=defconf interface=wlan2 /ip neighbor discovery-settings set discover-interface-list=LAN /interface l2tp-server server set authentication=mschap2 enabled=yes /interface list member add comment=defconf interface=bridge list=LAN add comment=defconf interface=ether1 list=WAN /interface wireless cap # set caps-man-addresses=192.168.0.1 enabled=yes interfaces=wlan2,wlan1 /ip address add address=192.168.0.1/24 comment=defconf interface=bridge network=192.168.0.0 /ip dhcp-client add comment=defconf dhcp-options=hostname,clientid disabled=no interface=ether4 /ip dhcp-server lease add address=192.168.0.13 mac-address=34:CE:00:8A:D0:55 server=defconf add address=192.168.0.14 mac-address=78:11:DC:56:EE:96 server=defconf add address=192.168.0.23 mac-address=B8:27:EB:CB:17:E5 server=defconf add address=192.168.0.11 mac-address=78:11:DC:03:F9:32 server=defconf add address=192.168.0.57 client-id=1:1c:1b:d:5d:44:6f mac-address=1C:1B:0D:5D:44:6F server=defconf add address=192.168.0.50 mac-address=7C:49:EB:A2:C6:7A server=defconf add address=192.168.0.12 mac-address=28:6C:07:BC:8A:DE server=defconf add address=192.168.0.18 mac-address=00:15:5D:00:14:02 server=defconf add address=192.168.0.24 mac-address=10:27:BE:11:89:D7 server=defconf add address=192.168.0.39 client-id=1:cc:b1:1a:18:28:a mac-address=CC:B1:1A:18:28:0A server=defconf add address=192.168.0.25 client-id=1:4c:5e:c:22:79:d mac-address=4C:5E:0C:22:79:0D server=defconf add address=192.168.0.19 client-id=1:f4:f5:db:a:5e:d6 mac-address=F4:F5:DB:0A:5E:D6 server=defconf add address=192.168.0.21 client-id=1:44:8a:5b:2b:c5:44 mac-address=44:8A:5B:2B:C5:44 server=defconf add address=192.168.0.17 client-id=1:30:7:4d:40:78:3f mac-address=30:07:4D:40:78:3F server=defconf add address=192.168.0.20 client-id=1:a4:50:46:d6:c:8b mac-address=A4:50:46:D6:0C:8B server=defconf add address=192.168.0.16 client-id=1:68:5b:35:94:bf:e0 mac-address=68:5B:35:94:BF:E0 server=defconf add address=192.168.0.27 client-id=1:50:e5:49:5a:8c:82 mac-address=50:E5:49:5A:8C:82 server=defconf add address=192.168.0.30 client-id=1:f0:76:6f:77:1c:7a mac-address=F0:76:6F:77:1C:7A server=defconf add address=192.168.0.26 mac-address=5C:CF:7F:95:E5:0A server=defconf /ip dhcp-server network add address=192.168.0.0/24 comment=defconf gateway=192.168.0.1 netmask=24 /ip dns set allow-remote-requests=yes /ip dns static add address=192.168.0.1 name=router.lan /ip firewall filter add action=accept chain=input connection-state=established,related in-interface=ether4 add action=accept chain=forward connection-state=established,related in-interface=ether4 add action=accept chain=forward dst-port=3389 in-interface=ether4 protocol=tcp add action=accept chain=input in-interface=ether4 protocol=igmp add action=accept chain=input dst-port=8291 in-interface=ether4 protocol=tcp add action=accept chain=forward dst-port=5160 in-interface=ether4 protocol=udp src-address=37.192.212.127 add action=accept chain=forward in-interface=ether4 protocol=udp add action=accept chain=input dst-port=1701 in-interface=ether4 protocol=udp add action=accept chain=forward dst-port=1234 in-interface=ether4 protocol=udp add action=accept chain=input dst-port=1234 in-interface=ether4 protocol=udp add action=accept chain=forward in-interface=ether4 port=8123 protocol=tcp add action=drop chain=forward connection-state=invalid in-interface=ether4 add action=drop chain=input in-interface=ether4 add action=drop chain=forward in-interface=ether4 out-interface=!ether4 add action=drop chain=forward in-interface=ether4 /ip firewall nat add action=masquerade chain=srcnat comment="defconf: masquerade" ipsec-policy=out,none out-interface=ether4 add action=dst-nat chain=dstnat in-interface=ether4 port=8123 protocol=tcp to-addresses=192.168.0.23 add action=dst-nat chain=dstnat dst-port=5160 in-interface=ether4 protocol=udp to-addresses=192.168.0.3 to-ports=5160 add action=dst-nat chain=dstnat dst-port=7777 in-interface=ether4 protocol=tcp to-addresses=192.168.0.57 to-ports=3389 /ip route add distance=1 dst-address=192.168.88.0/24 gateway=l2tp-out1 pref-src=192.168.0.1 /ip service set telnet disabled=yes set ftp disabled=yes set www disabled=yes port=8080 set ssh disabled=yes set api disabled=yes set api-ssl disabled=yes /ip ssh set forwarding-enabled=remote /routing igmp-proxy set quick-leave=yes /routing igmp-proxy interface add alternative-subnets=0.0.0.0/0 interface=ether4 upstream=yes add interface=bridge /system clock set time-zone-name=Europe/Moscow /tool mac-server set allowed-interface-list=LAN /tool mac-server mac-winbox set allowed-interface-list=LAN
Код: # sep/05/2019 22:58:32 by RouterOS 6.45.5 # software id = # # model = 951G-2HnD # serial number = /interface bridge add admin-mac= auto-mac=no comment=defconf name=bridge /interface wireless # managed by CAPsMAN # channel: 2452/20-Ce/gn(20dBm), SSID: , local forwarding set [ find default-name=wlan1 ] band=2ghz-b/g/n channel-width=20/40mhz-XX \ disabled=no distance=indoors frequency=auto mode=ap-bridge ssid=\ MikroTik-227911 wireless-protocol=802.11 /interface list add comment=defconf name=WAN add comment=defconf name=LAN /interface wireless security-profiles set [ find default=yes ] supplicant-identity=MikroTik /ip pool add name=default-dhcp ranges=192.168.88.10-192.168.88.254 /ip dhcp-server add address-pool=default-dhcp interface=ether2 name=defconf /interface bridge port add bridge=bridge interface=ether2 add bridge=bridge interface=ether3 add bridge=bridge interface=ether4 add bridge=bridge interface=ether5 add bridge=bridge interface=wlan1 add bridge=bridge interface=ether1 /ip neighbor discovery-settings set discover-interface-list=LAN /interface list member add comment=defconf interface=ether1 list=WAN add interface=ether2 list=LAN add interface=ether3 list=LAN add interface=ether4 list=LAN add interface=ether5 list=LAN add interface=wlan1 list=LAN /interface wireless cap # set caps-man-addresses=192.168.0.1 enabled=yes interfaces=wlan1 /ip address add address=192.168.88.1/24 comment=defconf disabled=yes interface=bridge \ network=192.168.88.0 /ip dhcp-client add comment=defconf dhcp-options=hostname,clientid disabled=no interface=bridge /ip dhcp-server network add address=0.0.0.0/24 comment=defconf gateway=0.0.0.0 netmask=24 /ip dns set allow-remote-requests=yes /ip dns static add address=192.168.88.1 name=router.lan /ip firewall service-port set ftp disabled=yes set tftp disabled=yes set irc disabled=yes set h323 disabled=yes set sip disabled=yes set pptp disabled=yes set udplite disabled=yes set dccp disabled=yes set sctp disabled=yes /ip service set telnet disabled=yes set ftp disabled=yes set www disabled=yes set ssh disabled=yes set api disabled=yes set api-ssl disabled=yes /ip ssh set forwarding-enabled=remote /system clock set time-zone-name=Europe/Moscow /system leds add leds=user-led type=off /tool mac-server set allowed-interface-list=LAN /tool mac-server mac-winbox set allowed-interface-list=LAN /tool sniffer set filter-ip-protocol=igmp Сейчас Wireless через capsman
