Добрый день, ситуация такая - имеется роутер mikrotik, 1 порт - первый провайдер, 2 порт - локальная сеть для первого провайдера, 3 порт - второй провайдер, 4 порт - локальная сеть второго провайдера. Интернет настроен, локалки берут сеть из своих провайдеров, только нужно, чтобы они и друг друга видели - на первой локалке есть расшаренные папки, которые должна видеть вторая локалка, а она никак их не видит. Помогите советом Добавление от 30.05.2019 18:55: конфиг прилагаю # may/30/2019 18:49:19 by RouterOS 6.44.3 # model = RB952Ui-5ac2nD /interface bridge add name=bridge-local /interface ethernet set [ find default-name=ether1 ] comment=WAN1 name=eth1 set [ find default-name=ether2 ] comment=LAN1 name=eth2 set [ find default-name=ether3 ] comment=WAN2 name=eth3 set [ find default-name=ether4 ] comment=LAN2 name=eth4 set [ find default-name=ether5 ] name=eth5 /interface pppoe-client add add-default-route=yes disabled=no interface=eth3 name=***** password=***** use-peer-dns=yes \ user=***** add add-default-route=yes disabled=no interface=eth1 name=***** password=***** use-peer-dns=yes \ user=***** /interface wireless set [ find default-name=wlan2 ] country=russia disabled=no mode=ap-bridge ssid=MikroTik \ wireless-protocol=802.11 /interface list add name=WAN add name=LAN /interface wireless security-profiles set [ find default=yes ] authentication-types=wpa-psk,wpa2-psk mode=dynamic-keys supplicant-identity=\ MikroTik wpa-pre-shared-key=***** wpa2-pre-shared-key=***** add authentication-types=wpa2-psk eap-methods="" management-protection=allowed mode=dynamic-keys \ name=profile1 supplicant-identity="" wpa2-pre-shared-key=***** /interface wireless set [ find default-name=wlan1 ] band=2ghz-b/g/n country=russia disabled=no mode=ap-bridge \ security-profile=profile1 ssid=MikroTik wireless-protocol=802.11 /ip hotspot profile set [ find default=yes ] html-directory=flash/hotspot /ip pool add name=pool_LAN1 ranges=192.168.0.10-192.168.0.110 add name=pool_LAN2 ranges=192.168.0.130-192.168.0.230 /ip dhcp-server add address-pool=pool_LAN1 disabled=no interface=bridge-local name=server1 add address-pool=pool_LAN2 disabled=no interface=eth4 name=server2 /interface bridge port add bridge=bridge-local interface=eth2 add bridge=bridge-local interface=wlan1 add bridge=bridge-local disabled=yes interface=wlan2 /interface list member add interface=bridge-local list=LAN add interface=TEK list=WAN /ip address add address=192.168.0.1/25 interface=bridge-local network=192.168.0.0 add address=192.168.0.129/25 interface=eth4 network=192.168.0.128 /ip dhcp-client add dhcp-options=hostname,clientid interface=wlan2 /ip dhcp-server network add address=192.168.0.0/25 dns-server=8.8.8.8,8.8.4.4 gateway=192.168.0.1 add address=192.168.0.128/25 dns-server=8.8.8.8,8.8.4.4 gateway=192.168.0.129 /ip dns set allow-remote-requests=yes servers=8.8.8.8,8.8.4.4 /ip firewall filter add action=accept chain=input protocol=icmp add action=drop chain=input comment="drop ssh forcers" dst-port=22,23 protocol=tcp src-address-list=\ login_blacklist add action=add-src-to-address-list address-list=login_blacklist address-list-timeout=1w3d chain=input \ connection-state=new dst-port=22,23 protocol=tcp src-address-list=ssh_stage3 add action=add-src-to-address-list address-list=ssh_stage3 address-list-timeout=2m chain=input \ connection-state=new dst-port=22,23 protocol=tcp src-address-list=ssh_stage2 add action=add-src-to-address-list address-list=ssh_stage2 address-list-timeout=2m chain=input \ connection-state=new dst-port=22,23 protocol=tcp src-address-list=ssh_stage1 add action=add-src-to-address-list address-list=ssh_stage1 address-list-timeout=2m chain=input \ connection-state=new dst-port=22,23 protocol=tcp /ip firewall mangle add action=mark-connection chain=input in-interface=TEK new-connection-mark=in_WAN1 passthrough=no add action=mark-connection chain=input in-interface=FORT new-connection-mark=in_WAN2 passthrough=no add action=mark-routing chain=output connection-mark=in_WAN1 new-routing-mark=rt_WAN1 passthrough=no add action=mark-routing chain=output new-routing-mark=rt_WAN2 passthrough=no routing-mark=in_WAN2 add action=mark-routing chain=prerouting in-interface=bridge-local new-routing-mark=rt_LAN1-WAN1 \ passthrough=no add action=mark-routing chain=prerouting in-interface=eth4 new-routing-mark=rt_LAN2-WAN2 passthrough=\ no /ip firewall nat add action=masquerade chain=srcnat src-address=192.168.0.0/24 /ip route add check-gateway=ping distance=1 gateway=TEK routing-mark=rt_WAN1 add distance=2 gateway=FORT routing-mark=rt_WAN1 add check-gateway=ping distance=1 gateway=FORT routing-mark=rt_WAN2 add distance=2 gateway=TEK routing-mark=rt_WAN2 add check-gateway=ping distance=1 gateway=TEK routing-mark=rt_LAN1-WAN1 add distance=2 gateway=TEK routing-mark=rt_LAN1-WAN1 add check-gateway=ping distance=1 gateway=FORT routing-mark=rt_LAN2-WAN2 add distance=2 gateway=FORT routing-mark=rt_LAN2-WAN2 /system clock set time-zone-name=Europe/Moscow
