Помогите с настройками

не пинайте сильно я новичок...
помогите с настройками....
нужно чтобы NAS был виден всеми компами и через WiFi и доступ из вне

 

Ну так начните с чего-нибудь.. Что настроили, как настроили..

 

да собственно еще ничего не делал..... ищу информацию с чего начать....

настройки вот

1:

#
/interface bridge
add name=bridge1
/ip hotspot profile
set [ find default=yes ] html-directory=flash/hotspot
/ip pool
add name=dhcp ranges=192.168.10.10-192.168.10.210
/ip dhcp-server
add address-pool=dhcp disabled=no interface=bridge1 name=dhcp1
/interface bridge port
add bridge=bridge1 interface=ether2
add bridge=bridge1 interface=ether3
add bridge=bridge1 interface=ether4
add bridge=bridge1 interface=ether5
/ip address
add address=192.168.10.1/24 interface=ether2 network=192.168.10.0
/ip dhcp-client
add dhcp-options=hostname,clientid disabled=no interface=ether1
/ip dhcp-server lease
add address=192.168.10.15 client-id=************** mac-address=\
************ server=dhcp1
add address=192.168.10.10 client-id=************** mac-address=\
************ server=dhcp1
/ip dhcp-server network
add address=192.168.10.0/24 gateway=192.168.10.1 netmask=24
/ip firewall filter
add action=accept chain=input protocol=icmp
add action=accept chain=input connection-state=established,related
add action=drop chain=input in-interface=ether1
add action=fasttrack-connection chain=forward connection-state=\
established,related
add action=accept chain=forward connection-state=established,related
add action=drop chain=forward connection-state=invalid
add action=drop chain=forward connection-nat-state=!dstnat connection-state=\
new in-interface=ether1
add action=accept chain=input in-interface=!ether1 src-address=\
192.168.10.0/24
/ip firewall nat
add action=masquerade chain=srcnat out-interface=ether1
/ip service
set www-ssl disabled=no
/system clock
set time-zone-autodetect=no time-zone-name=Europe/Moscow
/system clock manual
set time-zone=+03:00
/system ntp client
set enabled=yes primary-ntp=188.134.70.129 secondary-ntp=46.8.40.31
/system routerboard settings
set cpu-frequency=700MHz memory-frequency=1200DDR protected-routerboot=\
disabled

2:

#
/interface bridge
add name=bridge1
/ip hotspot profile
set [ find default=yes ] html-directory=flash/hotspot
/ip pool
add name=dhcp ranges=192.168.20.10-192.168.20.210
/ip dhcp-server
add address-pool=dhcp disabled=no interface=bridge1 name=dhcp1
/interface bridge port
add bridge=bridge1 interface=ether2
add bridge=bridge1 interface=ether3
add bridge=bridge1 interface=ether4
add bridge=bridge1 interface=ether5
/ip address
add address=192.168.20.1/24 interface=ether2 network=192.168.20.0
/ip dhcp-client
add dhcp-options=hostname,clientid disabled=no interface=ether1
/ip dhcp-server lease
add address=192.168.20.10 client-id=************** mac-address=\
************** server=dhcp1
add address=192.168.20.20 client-id=************** mac-address=\
************** server=dhcp1
add address=192.168.20.30 client-id=**************1 mac-address=\
************** server=dhcp1
/ip dhcp-server network
add address=192.168.20.0/24 gateway=192.168.20.1 netmask=24
/ip firewall filter
add action=accept chain=input in-interface=!ether1 src-address=\
192.168.20.0/24
/ip firewall nat
add action=masquerade chain=srcnat out-interface=ether1
/ip service
set www-ssl disabled=no
/system clock
set time-zone-autodetect=no time-zone-name=Europe/Moscow
/system clock manual
set time-zone=+03:00
/system ntp client
set enabled=yes primary-ntp=188.134.70.129 secondary-ntp=46.8.40.31
/system routerboard settings
set cpu-frequency=700MHz memory-frequency=1200DDR protected-routerboot=\
disabled

3:

/interface bridge
add name=bridge1
/interface wireless
set [ find default-name=wlan1 ] band=2ghz-onlyn country=russia disabled=no \
frequency=2437 mode=ap-bridge rate-set=configured ssid=DIPHENHYDRAMINE \
wireless-protocol=802.11 wmm-support=enabled wps-mode=disabled
/interface wireless security-profiles
set [ find default=yes ] authentication-types=wpa2-psk mode=dynamic-keys \
wpa-pre-shared-key=22001220 wpa2-pre-shared-key=22001220
/ip hotspot profile
set [ find default=yes ] html-directory=flash/hotspot
/ip pool
add name=dhcp ranges=192.168.30.10-192.168.30.210
/ip dhcp-server
add address-pool=dhcp disabled=no interface=bridge1 name=dhcp1
/interface bridge port
add bridge=bridge1 interface=ether2
add bridge=bridge1 interface=wlan1
/ip address
add address=192.168.30.1/24 interface=ether2 network=192.168.30.0
/ip dhcp-client
add dhcp-options=hostname,clientid disabled=no interface=ether1
/ip dhcp-server lease
add address=192.168.30.10 client-id=***************** mac-address=\
***************** server=dhcp1
add address=192.168.30.25 client-id=***************** mac-address=\
***************** server=dhcp1
add address=192.168.30.20 client-id=***************** mac-address=\
***************** server=dhcp1
add address=192.168.30.15 client-id=***************** mac-address=\
***************** server=dhcp1
/ip dhcp-server network
add address=192.168.30.0/24 gateway=192.168.30.1 netmask=24
/ip firewall filter
add action=accept chain=input in-interface=!ether1 src-address=\
192.168.30.0/24
/ip firewall nat
add action=masquerade chain=srcnat out-interface=ether1
/ip service
set www-ssl disabled=no
/system clock
set time-zone-autodetect=no time-zone-name=Europe/Moscow
/system clock manual
set time-zone=+03:00
/system ntp client
set enabled=yes primary-ntp=188.134.70.129 secondary-ntp=46.8.40.31
/system routerboard settings
set cpu-frequency=700MHz protected-routerboot=disabled

 

ну в общем да......
NAS виден только в своей подсети, а нужно что бы везде....

 

подскажите как? плииизз...

 

/ip dhcp-server lease
add address=192.168.10.15 client-id=************** mac-address=\
************ server=dhcp1
add address=192.168.10.10 client-id=************** mac-address=\
************ server=dhcp1