Доброго времени суток. Проблема следующего плана - сделан проброс порта 8080, но он все равно закрыт. Настройки: 1)/ip firewall nat print Flags: X - disabled, I - invalid, D - dynamic 0 ;;; default configuration chain=srcnat action=masquerade out-interface=ether1-gateway log=no log-prefix="" 1 ;;; 8080 y------f 192.168.1.X chain=dstnat action=dst-nat to-addresses=192.168.1.X to-ports=8080 protocol=tcp in-interface=ether1-gateway port=8080 connection-limit=100,32 log=no log-prefix="" 2) /ip route print Flags: X - disabled, A - active, D - dynamic, C - connect, S - static, r - rip, b - bgp, o - ospf, m - mme, B - blackhole, U - unreachable, P - prohibit # DST-ADDRESS PREF-SRC GATEWAY DISTANCE 0 A S 0.0.0.0/0 176.97.134.1 1 1 ADC 176.97.134.0/24 176.97.134.XXX ether1-gateway 0 2 ADC 192.168.1.0/24 192.168.1.1 bridge-local 0 3) /ip firewall filter print Flags: X - disabled, I - invalid, D - dynamic 0 chain=input action=accept protocol=tcp in-interface=ether1-gateway port=8291 log=no log-prefix="" 2 ;;; default configuration chain=input action=accept protocol=icmp log=no log-prefix="" 3 ;;; default configuration chain=input action=accept connection-state=established log=no log-prefix="" 4 ;;; default configuration chain=input action=accept connection-state=related log=no log-prefix="" 5 ;;; default configuration chain=forward action=accept connection-state=established log=no log-prefix="" 6 ;;; default configuration chain=forward action=accept connection-state=related log=no log-prefix="" 7 ;;; default configuration chain=forward action=drop connection-state=invalid log=no log-prefix="" 8 ;;; default configuration chain=input action=drop in-interface=ether1-gateway log=no log-prefix="" ПС:На компе порт открыт, проверялось в обход микротика.